Sandblast room
Release time:
2023-05-19
A sandblasting room is a device for ¶♥cleaning and descaling the surface ♣ ≈∞of large workpieces and for i↔λδncreasing the adhesion between the work≈β"piece and the coating.
A sandblasting room is a devic☆∑εe for cleaning and descaling the surf₩™ace of large workpieces and for i♠×★↔ncreasing the adhesion betwee£β'n the workpiece and the ®&coating.
The main features of a saσ©&™ndblasting room are that the operator¶αΩ is indoors, protective clo€₩thing and helmets prot★€ect the operator from abra'§£sive impacts, and ventilat$£¶↓ors provide fresh air to the op↑¥∏erator.
However, the design of a sandbla©♠γsting room also requires some attention♣ ₹.
Firstly, baffles shouπ£ld be installed at both the air i₽÷γ♠nlet and suction outlet of the sa♣ π∞ndblasting room to preve∞α"∑nt dust spillage or abrasi ₩ve material from being× sucked into the ventil ©£ation system.
Secondly, the air discharged from the ✘φ'sandblasting cleaning device must be pu™γ☆₽rified by the dust removal d↑↕evice and then discharged into t☆§®he atmosphere, and the dust $§accumulated in the dust removal devΩγ♣ice should be easy to remove and n♠☆ot allowed to pollute other working¶γ areas.
In addition, the air velocit↓•y in each section of the ventilation s>≥ystem must be correctly sγ• elected. Too low or too£★δ high air velocity in the pipe≈♦line will bring about adver ≠ se effects, such as clogging, energy ÷εconsumption, and wear and tear of↕ε the equipment.
The door of the cleaningα♠ room can be opened only after ∞the sandblasting operation has stopped,±₹∏₽ and the work of the ve¶±γ✔ntilation system can be stopped only af∞σ↔'ter the dusty air in t≤δ≠ he room has been eliminated.
The dusty air in the ventilation sy→∑stem flows in the ventilatio∑↔n ducts, and the ventilatλ≠←>ion ducts should be designed to$∞✘ reduce the resistanceα✔ so that the dusty air disappe < ars soon after the blastπ★★$ing work is finished.
Finally, baffles sho$$₽uld be installed at both the air inl•÷et and the opening of λ± the blasting room, so that the ab↑♣∑γrasive and dust particles $↑> during blasting will fly toαπ™ the neighbouring work area as liα >ttle as possible under the join§✔φ®t action of the air Ω λ"inlet airflow and the baffles, ¶♣and the dust will not spil€® l out of the air inl£₽≠≠et or the opening.
In addition, some air volume adjustment₹β♥← valves can be set on πα★¶the ventilation pipe to adjust the ai÷₩r volume as needed, so that→↓•¥ the air velocity in the system reac§π∑hes a reasonable level.÷¥↑₹
The above are several matters that neeΩ"d to be paid attentio♠¥§↑n to in the design of sand blasti ✔ng room, they can guarantee th®>e safety and efficiency of the<λ£∞ sand blasting room and imπ∑↓>prove the working effici≥≈×ency.
Recommended News
Message
* Please fill in the demand information→☆₽ carefully, we will contact you as soo ★∞n as possible
Copyright©2023 Liyang¥★∞ Flying Industry Co., Ltd