What is the difference between a™✘✔ vertical lathe and a horizonta∑φ±≠l lathe?
Release time:
2023-05-19
Lathes are divided into horizontal and ¥∞vertical lathes. Horizontal lathe has ₹✘∏>the spindle on the left side of ¥₹↑the machine and rests φ✔flat on the bed. It is used for sha'≈ft and disc parts. A ε¶vertical lathe has the spindle↓↔ ¥ above the bed and is used for l×£arge parts such as brake§δ" hubs.
What is the difference be ∞tween a vertical lathe and a horizonta ↓÷ l lathe?
Lathes are divided into horizontal anΩ÷Ω®d vertical lathes. Horiz↑₹♣ontal lathe has the spindleγ÷↔Ω on the left side of the machin↓εe and rests flat on δthe bed. It is used for shaft and di σsc parts. A vertical lathe has the ♣ spindle above the bed and is u¥←★₹sed for large parts such as b₩±αrake hubs.
The biggest difference is÷>£" the spindle. Vertical ♦✔↓means the spindle is upright and<★&≥ horizontal means the spindle is leveγ₹₽l. When a vertical lathe is working, th"♠e weight of the workpieγ₹∏÷ce is loaded directly on the table, and∏₩δε the table distributes the "₹∏✘weight to the bed.
Therefore, vertical lathe has large loa£∞d carrying capacity and good rigidity,∞€∞∏ which is suitable for processing wo£♦₽Ωrkpieces of large size, la→•↓rge diameter and short length, such as≈ ε disc, wheel hub and gear bla↕&φnk. While the workpie"γφce of horizontal lathe is≤>§₩ clamped on the chuck, ≥₩λ♥and the load is trans∞♣←≤ferred to the main spindle★", which is borne by the front and>✔ rear main bearings, so the carrying ♦ε♠capacity is small and the rigidity is <&&®poor. And horizontal lat γhe is easy to observe and operate,φ♦≥£ suitable for processing small and med✔÷✘ium-sized wheel disc and shaft par♠ •ts.
Previous Page
Recommended News
Message
* Please fill in the dema ÷↔'nd information caref₩±≠ully, we will contact you✘® α as soon as possible
Copyright©2023 Liyang F€¥∏lying Industry Co., Ltd