What is the difference between✔ a vertical lathe and a horizontal lathλ↕♥↓e?
Release time:
2023-05-19
Lathes are divided into horizon±× ≈tal and vertical lathes. Hori♣<πzontal lathe has the spindle on tβ♣he left side of the machine and rests'"β flat on the bed. It is used®₩§$ for shaft and disc pa✘×rts. A vertical lathe has the spindle ♣>≈above the bed and is used for large p"&arts such as brake hubs.
What is the differen "≥ce between a vertical lathe and"γ© a horizontal lathe?
Lathes are divided into ho'§rizontal and vertical lathes. Horizonta"'l lathe has the spindle"∏ on the left side of the machine and ₽ rests flat on the bed. I→€t is used for shaft a↕♦←nd disc parts. A ver∑σ'×tical lathe has the spindle above th→∏e bed and is used for large parts suc≥≥ ♦h as brake hubs.
The biggest difference₩↓ ≤ is the spindle. Verticφ↓al means the spindle is uprig ≈₩§ht and horizontal means the ≤ spindle is level. When a σvertical lathe is working, ±≥the weight of the workpiec∞₽€ e is loaded directly on the ←♠φ¥table, and the table distri π€butes the weight to the b©≠δed.
Therefore, vertical lathe≠≠ has large load carrying capacity and™♠© good rigidity, which is suitabl§©"∏e for processing wor≠∞kpieces of large size, largeΩ™ε diameter and short ☆™length, such as disc, wheel hub and g"←ear blank. While the workpiece₩Ω of horizontal lathe is clamped on ♥÷↔the chuck, and the load is transferreδ↕d to the main spindle,↕¥> which is borne by tεπhe front and rear main βσ☆bearings, so the carryin"δg capacity is small and the rig↑λidity is poor. And horizontal lat ÷≈'he is easy to observe and operate,∏£© suitable for processing small and med↑±ium-sized wheel disc and shaft>₩ parts.
Previous Page
Recommended News
Message
* Please fill in the d&← emand information careful ₹ly, we will contact you as soon as p™ ossible
Copyright©2023 Liyang Flying Industry₩÷δφ Co., Ltd